54/108Mbps Wireless Access Point


Super G Turbo (108M) Wireless Access Point




Enlarge Picture

Application Diagram











The highly efficient 2.4GHz IEEE 802.11g/b Wireless Access Point is designed to meet the need of wireless clients who use 2.4GHz 802.11b/g compliant wireless products such as PC Card. With the Dual-Standard capability, not only seamless but also simultaneous wireless data transmission between AP and all wireless clients using both 802.11b and g, can be sustained.

Device setup can be installed by the simple setup wizard provides as part of the web management utility or be manually configured for the advanced settings. Wireless network protection can be ensured by WEP encryption, Wi-Fi Protected Access (WPA) and 802.1x authentication to achieve maximum level of security.

The 2.4GHz 802.11g/b Wireless Access Point with optional Super G and turbo boost unbeatable performance up to 108Mbps, results in both data throughput and range coverage, is an ideal device to be deployed not only in complex network infrastructure such as enterprise corporation, metropolitan area but also in simple SOHO and home environment.


  • Fully IEEE 802.11g and 802.11b standards compliant

  • Full function wireless Access Point with roaming service

  • Support Super G with dynamic or static turbo for up to 108Mbps data rate and high throughput

  • Advanced wireless application mode AP, AP Client, wireless bridge, multiple bridge, repeater selectable

  • 54Mbps data transfer rate and auto fallback for longer coverage and noisy environment

  • Supports 11g data rate at 54, 48, 36, 24, 18, 12, 9, 6 Mbps and 11, 5.5, 2,1 Mbps of 11b

  • Stronger network security with 802.1x

  • Wi-Fi Protected Access (WPA), WPA-PSK and WEP encryption, open system and shared key

  • Quick and easy setup with Windows utility and web manageable



Application Diagram

Wireless Bridge (Multiple Bridge)

This device be setup into bridge mode and configured for point-to-point or multiple points bridging.
After the wireless bridge to bridge connection ready, all the Ethernet LANs connects to each other.


Wireless Repeater ( Remote AP )

The device can be setup into repeater mode and insert to the location where the AP coverage is not long enough. Wireless repeater repeats radio signals from remote AP for its wireless clients in coverage.


Wireless Access Point ( Infrastructure )

A typical wireless LAN can be setup by the standard access point. All kinds of wireless clients can be connected. The AP's Ethernet port then connected to a broadband router or switch for internet connection.


Wireless AP Client ( Infrastructure )

This device can be setup into AP client mode and configured for infrastructure wireless access.
It automatically connects to the available access point and is totally transparent to the Ethernet device or OS.




Wireless LAN Specifications  


Wireless: IEEE 802.11b, 802.11g
Ethernet: IEEE 802.3/u (10/100BaseTX)

Data Rate

802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 6 Mbps auto fallback
802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
802.11g and 802.11b automatically switch

Emission Type

Direct Sequence Spread Spectrum (DSSS)

Antenna type

2dBi Dipole Antenna
Detachable reverse SMA connector

Frequency Range

2.4GHz Industrial Scientific Medical (ISM) Band

Radio Channel

1 ~ 11 channels (North America)
1 ~ 13 channels (General Europe)
1 ~ 14 channels (Japan)

RF Frequency

2412 ~ 2462 MHz (North America)
2412 ~ 2472 MHz (General Europe)
2412 ~ 2484 MHz (Japan)

RF Output Power

16 18 dbm (typical)

Receiver Sensitivity

802.11g: -68 dBm (54Mbps), -90 dBm (6Mbps)
802.11b: -82 dBm (11Mbps), -90 dBm (1Mbps)

Modulation Type


Media Access Protocol

CSMA/CA (Collision Avoidance) with ACK


FCC Part 15 Class B (USA)
ETSI, CE (Europe)
WiFi Compliant



Software Specifications

Wireless Basic

AP Name, SSID, Channel
Authentication: Open System, Shared Key, WPA, WPA-PSK
WEP Key: Disable/Enable, 64/128-bit

Wireless Advanced

AP Mode: AP, AP Client, Wireless Bridge, Multiple Bridge, Repeater
Beacon Interval: 20 ~1000
RTS Threshold: 256~2432
Fragmentation Threshold: 1500~2364
STIM Interval: 1~255
SSID Broadcast: Enable/Disable
Transmit Rate: Auto, 54/48/36/24/18/12/11/9/6/5.5/2/1-Mbps
IEEE802.11g Only Mode: Enable/Disable
Antenna Transmit Power: Full, Half(-3dB), Quarter(-6dB), Eigth(-9dB), Min.

Super G Mode

Super G with Dynamic Turbo
Super G with Static Turbo
Super G without Turbo

TCP/IP Setting

Obtain IP Automatically, Fixed IP
IP Address, Netmask, Gateway
DHCP Server Disable/Enable, IP Range, DNS Server


Administrator ID and password

MAC Filter: Disable/Enable, Only Deny or only Allow

MAC Address Entry: 50 entries

802.1x Setting

Encryption Key Length: 64/128-bit
Lifetime Setting: 5 min. ~ 1 day
RADIUS Server: IP address, Port Number, Shared Secret
Optional second RADIUS Server: IP address, Port Number, Shared Secret


Setup Wizard
Save and restore setting
Restore factory default setting
Firmware upgrade



Hardware Specifications

Standard Compliance

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.11g
IEEE 802.11b


LAN: One 10/100Base-T/TX RJ-45 ports
Wireless Access Point
One reset button for factory default setting


Wireless: Atheros

LED Display

Power, LAN, Wireless LAN


Wall mounting


143 (L) x 110 (W) x 45 (H) mm


EMI/EMC: FCC Class B, CE Mark


Operating Temperature: 0 ~ 45℃ (32 ~ 113℉)
Storage Temperature: -20 ~ 60℃ (-4 ~ 140℉)
Humidity: 0 ~ 90% non-condensing


External power adapter, 5VDC, 2A


Ordering Information




54/108Mbps Wireless Access Point


EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2003