Wireless-G Outdoor PoE Client Bridge

  

Add Wireless Capability To Your Existing Wired Network

  

Features

Datasheet

Application Diagram

Manual

Specifications

Enlarge Picture

Ordering

UOW2000-CB67

   


 



 

Overview


UOW2000-CB67 is an outdoor Wireless Client Bridge with plastic case for dust tight, watertight, and weatherproof protection to meet IP67 industry standard. It is Wi-Fi compliant with both 802.11g/b dual standards and supports IEEE802.3af Power Over Ethernet (PoE) standard that
provides power and data over existing network cables.
 

The UOW2000-CB67 eliminates the need for electricians or extension cords while installing new wireless expanding equipments. Therefore, UOW2000-CB67 can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise wireless network environments.
 

The UOW2000-CB67 provides WDS bridging function, allowing users to connect two or more Access Points together. It also provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. This roaming feature makes notebooks or wireless devices portable to move everywhere within wireless signal coverage. It also included an embedded DHCP server that can automatically assign IP address to wireless clients. This device setup can be installed by the simple setup wizard provides as part of the web management utility or be manually configured for the advanced settings. Wireless network protection can be ensured by WEP encryption, Wi-Fi Protected Access (WPA) and 802.1x authentication to achieve maximum level of security.

 

Features

  • Wi-Fi compliant with IEEE 802.11g and 802.11b

  • IEEE802.3af Power Over Ethernet (PoE) standard

  • Output power up to 17dBm (23dBm, 26dBm option)

  • Support Point-to-Point, Point-to-multipoint , Ad Hoc mode, Infrastructure mode, , Client Bridge, WDS (Wireless Distribution System) wireless connectivity

  • Plastic case with outdoor Dust tight, Watertight and Weatherproof IP67 industry standard

  • upports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x ), WPA2 advanced wireless data encryption

  • 2.4GHz ISM band, no license required for operation

  • Supports DHCP server & firmware upgrade via Web

  • Provides MAC access control & hidden SSID function

  • Wide temperature range, robust mechanical design

  • Provides wireless reverse SMA detachable antenna

  • Supports SNMP v1 & Watch dog function: reboot the system while some situations make system lock up

 TOP

Application Diagram

Building-to-Building Network Connection Diagram

The UOW2000-CB67 operates in Client Bridge mode or remote Bridge mode, and connect to UOW2000-AP/CB to construct point-to-point as well as point-to-multipoint topologies, for maximum flexibility in configuring building-to-building networks and WISP functions

 TOP

Specifications

Wireless LAN Specifications  

Wireless Standards

IEEE802.11b  11Mbps Wireless LAN

IEEE802.11g  54Mbps Wireless LAN

IEEE802.3af   Power over Ethernet (PoE)

IEEE802.3    10Base-T;

IEE802.3u    100Base-TX;

IEEE802.3x   Full-duplex Operation and Flow Control  

Data Rate

802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback

802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback

Frequency Band

2.4~2.484GHz ISM (Industrial Scientific Medical) Band

Operating Modes

Client Bridge Mode

Ad Hoc Mode

Infrastructure Mode

Point-to-Point Mode

Point-to-Multipoint Mode

WDS Mode

Radio Channel

2 for Spain

3 for France

11 for North America

13 for Europe

14 for Japan

Modulation Technology

Orthogonal Frequency Division Multiplexing (OFDM)

DBPSK @ 1Mbps

DQPSK @ 2Mbps

CCK @ 5.5 & 11Mbps

BPSK @ 6 and 9Mbps

QPSK @ 12 and 18Mbps

16-QAM @ 24 and 36Mbps

64-QAM @ 48 and 54Mbps

RF Output Power (Typical )

17dBm @ 1,2,5.5, and 11Mbps

17dBm @ 6Mbps

14dBm @54Mbps

IP Auto-Configuration

DHCP Client / Server

Receiver Sensitivity

54Mbps OFDM, 10% PER, -72dBm

Available Transmit Power

30dBm 3bDm@1, 2, 5.5, and 11Mbps

30dBm 3bDm@6Mbps

28dBm 3bDm@54Mbps

Data Security

64/128-bit WEP

WPA, WPA2

TKIP MAC Address Filtering Hide SSID in beacons Layer 2 Isolation

IEEE802.1X Authenticator

RADIUS Client (EAPMD5/TLS/TTLS supports in AP Mode WPA

Pre Share Key (PSK)

Management Configuration

Web-based configuration (HTTP)

Firmware Upgrade

Upgrade firmware via web browser

Media Access Control

Carrier Sense Multiple Access with Collision

Avoidance (CSMA/CA)K

 

Hardware Specifications

Interface

1 x 10/100Mbps RJ-45 LAN Port

Wireless Client Bridge

RF Information

Atheros BB/MAC/RF

Antenna Type

1 x 2.4GHz 9dBi Internal Antenna

Power

Active Ethernet IEEE802.3af (PoE), 48 VDC/0.375A

Installation

Wall-Mounting and Mast Mounting

Dimension

209.1 ( L ) x 165.4 ( W ) x 61.5 ( H ) mm

Weight

600g (1.1 lbs)

Operating Temperature

-20 ~ 70 (-4F ~ 158F)

Storage Temperature

-40 ~ 80 (-40F ~ 176F)

Humidity

5 ~ 95% non-condensing

Compliant

FCC Part 15/UL, ETSI 300/328/CE, Wi-Fi Compliant


Package Contents

 

  • 1 x Wireless-G Outdoor PoE Client Bridge

  • 1 x Inline Power Injector (PoE); 1 x 48V, 0.375A Power Adapter

  • 1 x Setup Utility CD-ROM

  • 1 x 1.8m Grounding cable; 1 x 30m Ethernet Cable

  • 1 x Wall Mounting Kit; 1 x Mast Mounting Kit

 

 TOP

Ordering Information

Model

Description

UOW2000-CB67

Wireless Outdoor PoE Client Bridge with 9 dBi Internal Antenna (IP67, Plastic Case)

 


EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2008