|
Overview
The highly efficient 2.4GHz IEEE 802.11g/b Wireless Access Point is
designed to meet the need of wireless clients who use 2.4GHz
802.11g/b compliant wireless products
such
as PC Card. With the Dual-Standard capability, not only seamless but
also simultaneous wireless data transmission between AP and all
wireless clients using both 802.11g and 802.11b can be sustained.
The 2.4GHz 802.11g/b Wireless Access Point with Super-G function
boost unbeatable performance up to 108Mbps, results in both data
throughput and range coverage, is an ideal device to be deployed not
only in complex network infrastructure but also in simple SOHO and
home environment.
The UGL2454-APXR provides WDS bridging function, allowing users to
connect two or more Access Points together. It also provides Direct
Sequence Spread Spectrum (DSSS) operation for transparent bridging
and roaming capabilities for wireless nodes. This roaming feature
makes notebooks or wireless devices portable to move everywhere
within wireless signal coverage. The UGL2454-APXR also included an
embedded DHCP server that can automatically assign IP address to
wireless clients.
This device setup can be installed by the simple setup wizard
provides as part of the web management utility or be manually
configured for the advanced settings. Wireless network protection
can be ensured by WEP encryption, Wi-Fi Protected Access (WPA) and
802.1x authentication to achieve maximum level of security.
The
UGL2454-APXR also includes advanced security features such as WPA2
and AES to keep your wireless connection safe from unauthorized
access.
|
Features
-
Wi-Fi compliant with IEEE 802.11g and 802.11b
-
High performance Super G mode up to 108Mbps data transfer rate
for 802.11g Turbo function
-
eXtended Range (XR) Technology for better wireless signal
coverage
-
Supports AP, AP Client, Repeater, Bridge (Point To Point) and
Bridge (Point to Multi-Point) modes
-
Provides 10/100M LAN port for wireless to wired network
connection
-
Supports WDS Enable/Disable function for AP Client and Repeater
modes
-
Supports 64/128-bit WEP wireless data encryption
-
Supports advance network security of 802.1X/WPA, WPA-PSK, TKIP/AES,
WPA2, WPA2-PSK
-
2.4GHz ISM band, no license required for operation
-
Provides MAC access control & hidden SSID function
-
Quick setup wizard and Web based user interface for easy
management and configuration
TOP
|
Application
Diagram
Wireless AP Client ( Infrastructure ) |
|
A typical wireless LAN can be setup by the standard access
point. All kinds of wireless clients can be connected. The
AP's Ethernet port then connected to a broadband router or
switch for internet connection. |
Wireless Access Point ( Infrastructure ) |
|
This device can be setup into AP client mode and will
transform any IEEE 802.3 Ethernet device (e.g., a computer,
printer, etc.) into an 802.11b wireless client when it
communicates with another Wireless Access Point. |
Wireless Bridge (Multiple Bridge) |
|
This device
can
be setup into bridge mode and configured for
point to multi-point
bridge.
After the wireless bridge connection ready, all the Ethernet
LANs connects to each other. |
Wireless Repeater ( Remote AP ) |
|
The device can be setup into repeater mode and insert to the
location where the AP coverage is not long enough.
Wireless repeater repeats radio signals from root AP for its
wireless clients in coverage. |
TOP
|
Specifications
Wireless
LAN Specifications
|
Wireless
Standards
|
IEEE 802.11g, IEEE 802.11b |
Data Rate
|
Atheros Super-G mode up to 108Mbps
802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto
fallback
802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback |
Frequency Band
|
2.4GHz ISM (Industrial Scientific Medical) Band |
RF Frequency
|
2412 ~ 2462 MHz (North America)
2412 ~ 2472 MHz (Europe)
2412 ~ 2484 MHz (Japan) |
Radio Channel
|
1 ~ 11 channels (North America)
1 ~ 13 channels (Europe)
1 ~ 14 channels (Japan) |
Antenna type
|
Reverse SMA connector |
RF Output Power
|
16 – 18 dbm (typical) |
Receiver Sensitivity
|
54Mbps OFDM, 10% PER, -68dBm
11Mbps CCK, 8% PER, -86dBm
6Mbps OFDM, 10% PER, -88dBm
1Mbps BPSK, 8% PER, -93dBm |
Data Security |
WPA-WiFi Protected Access, WPA2, WPA2-PSK
(64/128-bit WEP with TKIP, MIC, IV Expansion,
Shared Key Authentication) |
Modulation Type |
Orthogonal Frequency Division Multiplexing (OFDM)
Complementary Code Keying (CCK) |
Media Access Control
|
CSMA/CA with ACK |
Compliant
|
FCC Class B
CE Mark
Wi-Fi Compliant |
Hardware Specifications |
Interface |
LAN: One 10/100Base-T/TX RJ-45 ports
Wireless Access Point
One reset button for factory default setting |
Antenna Type |
2.4GHz Detachable 2dBi Reverse SMA Antenna
|
Installation |
Desktop, Wall-Mounting |
Chipset |
Wireless: Atheros |
LED |
Power, LAN, Wireless LAN |
Dimension
|
147 ( L ) x 115 ( W ) x 35 ( H ) mm |
Weight
|
130g (Net) |
Operating Temperature |
0 ~ 45℃
(32F ~ 113F) |
Storage Temperature |
-20 ~ 60℃
(-4F ~ 140F) |
Humidity |
0 ~ 95% non-condensing |
TOP
|
Ordering
Information
Model
|
Description
|
UGL2454-APXR(v2) |
108Mbps Wireless-G Access Point ( with
Super-G Mode ) |
|
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2007
|
|