54Mbps Wireless-G Access Point


Linking to Internet with Express Wireless Turbo Mode




Application Diagram



Enlarge Picture















The highly efficient 2.4GHz IEEE 802.11g/b Wireless Access Point is designed to meet the need of wireless clients who use 2.4GHz 802.11g/b compliant wireless products such as PC Card. With the Dual-Standard capability, not only seamless but also simultaneous wireless data transmission between AP and all wireless clients using both 802.11g and 802.11b can be sustained


The 2.4GHz 802.11g/b Wireless Access Point with turbo mode function boost unbeatable performance up to 72Mbps, results in both data throughput and range coverage, is an ideal device to be deployed not only in complex network infrastructure but also in simple SOHO and home environment.


The UGL2454-APK provides WDS bridging function, allowing users to connect two or more Access Points together. It also provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. This roaming feature makes notebooks or wireless devices portable to move everywhere within wireless signal coverage. The UGL2454-APK also included an embedded DHCP server that can automatically assign IP address to wireless clients.

This device setup can be installed by the simple setup wizard provides as part of the web management utility or be manually configured for the advanced settings. Wireless network protection can be ensured by WEP encryption, Wi-Fi Protected Access (WPA) and 802.1x authentication to achieve maximum level of security.



  • Wi-Fi compliant with IEEE 802.11g and 802.11b

  • Provides 10/100M LAN port for wireless to wired network connection

  • Supports turbo model up to 72Mbps data transfer

  • Supports Ad Hoc mode, Infrastructure mode, AP Bridge, AP Bridge WDS mode anRepeater mode

  • Supports a switch for selecting AP client or AP mode

  • Supports 64/128-bit WEP wireless data encryption

  • Supports advance network security of 802.1X/WPA, WPA-PSK, TKIP/AES, WPA2, WPA2-PSK

  • 2.4GHz ISM band, no license required for operation

  • Supports DHCP server

  • Supports Authentication for wireless connectivity based on ESSID

  • Provides MAC access control & hidden SSID function

  • Quick setup wizard and Web based user interface for easy management and configuration

  • Supports VPN pass through and Firmware upgrade function via Web


Application Diagram

Wireless AP Client ( Infrastructure )

A typical wireless LAN can be setup by the standard access point. All kinds of wireless clients can be connected. The AP's Ethernet port then connected to a broadband router or switch for internet connection.


Wireless Access Point ( Infrastructure )

This device can be setup into AP client mode and will transform any IEEE 802.3 Ethernet device (e.g., a computer, printer, etc.) into an 802.11b wireless client when it communicates with another Wireless Access Point.



Wireless Repeater ( Remote AP )

The device can be setup into repeater mode and insert to the location where the AP coverage is not long enough. Wireless repeater repeats radio signals from root AP for its wireless clients in coverage.



Wireless LAN Specifications  

Wireless Standards

IEEE 802.11g, IEEE 802.11b

Data Rate

802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback

802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
Up to 72Mbps when Turbo Mode enabled

Frequency Band

2.4GHz ISM (Industrial Scientific Medical) Band

RF Frequency

2412 ~ 2462 MHz (North America)

2412 ~ 2472 MHz (Europe)

2412 ~ 2484 MHz (Japan)

Radio Channel

1 ~ 11 channels (North America)

1 ~ 13 channels (Europe)

1 ~ 14 channels (Japan)

Antenna type

Reverse SMA connector

RF Output Power

16 – 18 dbm (typical)

Receiver Sensitivity

54Mbps OFDM, 10% PER, -68dBm

11Mbps CCK, 8% PER, -86dBm

6Mbps OFDM, 10% PER, -88dBm

1Mbps BPSK, 8% PER, -93dBm

Data Security

WPA-WiFi Protected Access, WPA2, WPA2-PSK (64/128-bit WEP with TKIP, MIC, IV Expansion, Shared Key Authentication)

Modulation Type

Orthogonal Frequency Division Multiplexing (OFDM)
Complementary Code Keying (CCK)

Media Access Control



FCC Class B

CE Mark

Wi-Fi Compliant


Hardware Specifications


LAN: One 10/100Base-T/TX RJ-45 ports

Wireless Access Point

One reset button for factory default setting

Antenna Type

2.4GHz Detachable 3dBi Reverse SMA Antenna


Desktop, Wall-Mounting


Flash: 2MB



Power, LAN, Wireless


111 ( L ) x 79 ( W ) x 30 ( H ) mm


External Power Adapter, 12VDC, 1A


130g (Net)

Operating Temperature

0 ~ 40 (32F ~ 104F)

Storage Temperature

-10 ~ 70 (-14F ~ 140F)


10 ~ 95% non-condensing



Magnet  Mount


  • 1 x 54Mbps Wireless Access Point

  • 1 x Reverse SMA Antenna

  • 1 x Setup Utility/ Manual CD-ROM

  • 1 x Quick Installation Guide(QIG)

  • 1 x AC Power Adapter




Ordering Information




54Mbps Wireless-G Access Point with Turbo Mode


EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2006