|
|
|
Overview
The
highly efficient 2.4GHz IEEE 802.11g/b Wireless Access Point is
designed to meet the need of wireless clients who use 2.4GHz
802.11g/b compliant wireless products such as PC Card. With the
Dual-Standard capability, not only seamless but also simultaneous
wireless data transmission between AP and all wireless clients using
both 802.11g and b, can be sustained.
This
device setup can be installed by the simple setup wizard provides as
part of the web management utility or be manually configured for the
advanced settings. Wireless network protection can be ensured by WEP
encryption, Wi-Fi Protected Access (WPA) and 802.1x authentication
to achieve maximum level of security.
The
2.4GHz 802.11g/b Wireless Access Point with optional Super G and
turbo function boost unbeatable performance up to 108Mbps, results
in both data throughput and range coverage, is an ideal device to be
deployed not only in complex network infrastructure but also in
simple SOHO and home environment.
|
|
Features
-
Dual standards IEEE 802.11g and 802.11b
compliant
-
Provides 10/100M LAN port for wireless to wired
network connection
-
High performance Super G mode up to 108Mbps data
transfer rate for 802.11g Turbo function
-
Advanced wireless application as AP, AP-Client,
bridge or repeater mode configurable
-
Automatically fallback 11g data rate at 54, 48, 36,
24, 18, 12, 9, 6 Mbps and 11b at 11, 5.5, 2,1 Mbps
-
Strong network security with 802.1X authentication,
and 64/128-bit WEP encryption
-
Supports WPA (Wi-Fi Protected Access) for both
802.1x and WPA-PSK
-
Supports web-based user interface and telnet
management for advanced users
-
Support 64/128/152 bit WEP, WPA (Wi-Fi Protected
Access) and Access Control List for security
-
Support wireless infrastructure mode and WDS
(Wireless Distribution System) Function
TOP
|
|
Application
Diagram
|
Wireless Bridge (Multiple Bridge) |
|
|
|
This
device be setup into bridge mode and configured for
point-to-point or multiple points bridging.
After the wireless bridge to bridge connection ready, all
the Ethernet LANs connects to each other. |
|
Wireless
Repeater ( Remote AP ) |
|
|
|
The
device can be setup into repeater mode and insert to the
location where the AP coverage is not long enough. Wireless
repeater repeats radio signals from remote AP for its
wireless clients in coverage. |
|
Wireless
Access Point ( Infrastructure ) |
|
|
|
A
typical wireless LAN can be setup by the standard access
point. All kinds of wireless clients can be connected. The
AP's Ethernet port then connected to a broadband router or
switch for internet connection. |
|
Wireless
AP Client ( Infrastructure ) |
|
|
|
This
device can be setup into AP client mode and configured for
infrastructure wireless access.
It automatically connects to the available access point and
is totally transparent to the Ethernet device or OS. |
TOP
|
|
Specifications
|
Wireless
LAN Specifications
|
|
Wireless
Standards
|
IEEE
802.11g, IEEE 802.11b
|
|
Data
Rate
|
802.11g:
54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback
802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
Up to 108Mbps when Super G enabled
|
|
Frequency
Band
|
2.4GHz
ISM (Industrial Scientific Medical) Band
|
|
RF
Frequency
|
2412
~ 2462 MHz (North America)
2412 ~ 2472 MHz (Europe)
2412 ~ 2484 MHz (Japan) |
|
Radio
Channel
|
1
~ 11 channels (North America)
1 ~ 13 channels (Europe)
1 ~ 14 channels (Japan) |
|
Antenna
type
|
0dBm
gain with reverse SMA connector
|
|
RF
Output Power
|
16
– 18 dbm (typical) |
|
Receiver
Sensitivity
|
54Mbps
OFDM, 10% PER, -68dBm
11Mbps CCK, 8% PER, -82dBm
6Mbps OFDM, 10% PER, -88dBm
1Mbps BPSK, 8% PER, -89dBm |
|
Data
Security
|
WPA-WiFi
Protected Access (64,128, 152-bit WEP with TKIP, MIC, IV
Expansion, Shared Key Authentication)
|
|
Modulation
Type
|
Orthogonal
Frequency Division Multiplexing (OFDM)
Complementary Code Keying (CCK)
|
|
Media
Access Protocol
|
CSMA/CA
with ACK
|
|
Compliant
|
FCC
Part 15 Class B (USA)
ETSI, CE (Europe)
WiFi Compliant
|
TOP
|
Software
Specifications
|
|
IP
Address Setting |
Obtain
IP Automatically (DHCP), Fixed IP
IP Address, Subnet mask, Default Gateway |
|
Device
Information |
MAC
address, Software version, System name and system contact |
|
AP
Mode Setting |
Access
Point
Point to Point Bridge: 1 remote AP MAC address
Point to Multi-Point Bridge: 8 remote AP MAC address
AP Repeater: 1 Root AP MAC address
AP Client: 1 Root AP MAC address |
|
Wireless
Parameter Setting |
SSID
and SSID Broadcast Enable/disable
Radio channel selection
Transmit Rate: Auto, 54/48/36/24/18/12/11/9/6/5.5/2/1-Mbps
Beacon Interval: 20 ~1000
DTIM (Delivery Traffic Indication Message): 1~255
Fragmentation Length: 256~2364
RTS Length: 256~2346
Transmit Power: Full, Half(-3dB), Quarter(-6dB),
Eighth(-9dB), Min.
IEEE802.11g Only Mode: Enable/Disable
Radio: On/Off |
|
Super
G Mode |
Disabled
Super without Turbo
Super with Static Turbo
Super with Dynamic Turbo |
|
Access
Control |
MAC
address Control Accept or Reject List |
|
Security |
Administrator
ID and password
Authentication: Open System, Shared Key, WPA
Encryption: Disabled/Enabled
Key Type: Hex/ASCII
Key Size: 64/128/152-bit |
|
Tools |
Setup
Wizard for Wireless Basic and Security settings
Telnet service enable/disable
Save and restore configuration setting file
Restore factory default setting
Firmware upgrade |
|
Status |
Device
IP Information: MAC address, Get IP from, IP address,
Default gateway
Wireless LAN Status: SSID, Channel, Rate, Security Level |
TOP
|
Hardware
Specifications
|
|
Standard
Compliance |
IEEE
802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.11g
IEEE 802.11b |
|
Interface |
LAN:
One 10/100Base-T/TX RJ-45 ports
Wireless Access Point
One reset button for factory default setting |
|
Chipset |
Wireless:
Atheros |
|
LED
Display |
Power,
LAN, Wireless LAN |
|
Installation |
Desktop
Wall mounting |
|
Dimension |
142
(L) x 109 (W) x 31 (H) mm |
|
Certification |
EMI/EMC:
FCC Class B, CE Mark |
|
Environmental |
Operating
Temperature: 0 ~ 55℃ (32 ~ 149℉)
Storage Temperature: -20 ~ 75℃ (-4 ~ 167℉)
Humidity: 95% Maximum (non-condensing) |
|
Power |
External
power adapter, 5VDC, 2A |
TOP
|
|
Ordering
Information
|
Model
|
Description
|
|
UGL2454-APA
|
54/108Mbps
Wireless-G Access Point
|
|
 |
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2005
|
|
.jpg)
Features.jpg){kind=small}
Enlarge Picture
UGL2454-APA
