|
Overview
The
highly efficient 2.4GHz IEEE 802.11g/b Wireless Network Access Point
is designed to meet the need of wireless clients who use 2.4GHz
802.11b/g compliant wireless client products such as PC Card. With
the Dual-Standard capability, not only seamless but also
simultaneous wireless data transmission between AP and all wireless
clients using both 802.11b and g, can be sustained.
Network
setup can be installed by the simple setup utility Wireless
Navigator provides easy to link the web management interface.
Wireless
network protection can be ensured by WEP encryption, Wi-Fi Protected
Access (WPA) and 802.1x authentication to achieve maximum level of
security. The 2.4GHz 802.11g/b Wireless Access Point with unbeatable
performance results in both data throughput and range coverage, is
an ideal device to be deployed not only in complex network
infrastructure such as enterprise corporation, metropolitan area but
also in simple SOHO and home environment.
|
Features
-
Complies
with IEEE 802.11g and 802.11b wireless standards
-
Full
function wireless Access Point with user selectable Ethernet to
wireless bridge
-
54Mbps
data transfer rate and auto fallback for longer coverage and
noisy environment
-
Supports
11g data rate at 54, 48, 36, 24, 18, 12, 9, 6 Mbps and 11, 5.5,
2,1 Mbps of 11b
-
Maximum
interoperability with 11g and 11b or maximum performance
selectable
-
Ethernet
to wireless bridge mode supports infrastructure bridge and
ad-hoc bridge
-
Use
pass phrase to generates 64/128-bit WEP encryption for most
convenient
-
Automatic
select the best transmission rate or fixed rate selectable
-
Quick
and easy setup with Wireless Navigator utility and web manageable
TOP
|
Application
Diagram
TOP
|
Specifications
Wireless
LAN Specifications
|
Standards
|
IEEE802.11g,
IEEE802.11b Standards |
Emission
Type
|
Direct
Sequence Spread Spectrum (DSSS)
|
Modulation
Type
|
BPSK,
QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/64-QAM)
|
Frequency
Range
|
2.4GHz
Industrial Scientific Medical (ISM) Band
|
RF
Frequency
|
2412
~ 2462 MHz (North America)
2412 ~ 2472 MHz (Europe)
2412 ~ 2484 MHz (Japan) |
Radio
Channel
|
1
~ 11 channels (North America)
1 ~ 13 channels (Europe)
1 ~ 14 channels (Japan) |
Data
Rate
|
802.11g:
54 / 48 / 36 / 24 / 18/ 12 / 6 Mbps auto fallback
802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
802.11g and 802.11b automatically switch
|
RF
Output Power
|
18
dBm @ 11M CCK (typical)
14 dBm @ 54M OFDM (typical) |
Receiver
Sensitivity
|
802.11g:
-68 dBm (54Mbps), -90 dBm (6Mbps)
802.11b: -82 dBm (11Mbps), -90 dBm (1Mbps) |
Security
|
Wired
Equivalent Privacy (WEP) 64 / 128 bit
Wi-Fi Protected Access (WPA, later release)
|
Media
Access Protocol
|
CSMA/CA
(Collision Avoidance) with ACK
|
Compliant
|
FCC
Part 15 Class B (USA)
ETSI, CE (Europe)
WiFi Compliant
|
Power
Consumption
|
802.11g:
TX 650mA, RX 400mA, Standby 20mA
802.11b: TX 60mA, RX 350mA, Standby 20mA
|
TOP
Software
Specifications
|
Wireless
Basic
|
Maximum
interoperability mode
Maximum performance mode
Wireless network name (SSID)
Radio Channel: 1~13 selectable (14 optional for Japan)
Transmission rate: 54/48/36/24/18/12/9/6/11/5.5/2/1/auto
Wireless mode: infrastructure/ad-hoc (Bridge mode only) |
Wireless
Advanced
(AP Mode Only) |
Preamble
type: Long/Short
Maximum associated stations setting
Fragmentation threshold setting
RTS threshold setting
Beacon period setting
DTIM interval setting
Hide SSID in beacons: enable/disable |
Administration |
Wireless
Navigator utility for Windows
Web browser manageable user interface
IP setting: static IP / DHCP client
Access point name (Device name for bridge)
Allow firmware upgrade: enable/disable
Device mode: switch to bridge / switch to AP
User name and password |
Security |
Access
Control: 16 MAC address entries (AP mode only)
Wired Equivalent Privacy (WEP): enable/disable
WEP key length: 64-bit/128-bit
WEP key selection: 4 sets
Authentication: open/shared key
Pass phrase generator |
Help |
Help
message for each setup page
Associated MAC address table status (AP mode)
Available access point status (Bridge mode)
Access Point information / Link Information
Current IP settings / Bridge Information
Current wireless settings |
TOP
Hardware
Specifications
|
Interface
|
LAN:
One 10/100Base-T/TX RJ-45 ports
Wireless LAN: Access Point or wireless bridge
One reset button for factory default setting |
Antenna
Type
|
Detachable
Antenna with Reverse SMA connector
2dBi gain (max.) |
LED
Indicator |
Power,
LAN, Wireless LAN, Diagnostic |
Power
|
5VDC,
2A External power adapter |
Dimension |
105
(L) x 58 (W) x 130 (H) mm |
Environment |
Operating
Temperature: 0 ~ 50C
Storage Temperature: -25 ~ 70C
Humidity: 10 ~ 90% non-condensing |
TOP
|
Ordering
Information
Model
|
Description
|
GL2454-API
|
54Mbps
Wireless LAN Access Point
|
|
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2003
|
|