|
|
|
Overview
The access point allows your wireless LAN easy,
seamless and secure connectivity to your existing Wired LAN or to
the Internet at 22Mbps! Using the new 2.4GHz IEEE802.11b Wireless
LAN standard and Packet Binary Convolutional Code (PBCC) Technology,
the device gives you not only increased speed and mobility between
your desktop, the conference room, or the Campus (with automatic
'roaming') - but also the ability to communicate in both PC and Mac
environments. Set-up is easy with the Web browser interface.
The design of this product is based on advanced
bridge-on-a-chip module, a highly integrated ASIC designed to
combine legacy LANs with wireless LANs. The Access Point performs
all the necessary inter-networking and bridging functions. It
receives data from both networks, stores them locally for further
processing, installs and maintains connections and transmits the
packets to the proper destination.
In addition to be an Access Point, there are three
other operating modes applicable. Wireless
bridge can be used to connect Ethernet LANs with wireless; AP
Client mode turn an Ethernet device talks to a wireless LAN Access
Point and repeater mode can be used to repeat signals where
the original AP is too far away from the clients.
|
|
Features
-
IEEE802.11b plus 22Mbps wireless LAN standards
-
2.4GHz DSSS
technology and PBCC for faster data rate
-
4X/22/11/5.5/2/1Mbps auto fallback wireless speed
-
Wireless security with 64/128/256-bit WEP encryption
-
Supports user authentication 802.1X to RADIUS
servers
-
Advanced settings for AP/AP Client/Bridge/Repeater
modes
-
Supports 22 Mbps Packet Binary Convolutional Code (PBCC) and 4X mode for faster throughput
-
Auto-sensing 10/100Mbps Ethernet LAN Connection
-
Web Browser Management and Configuration
-
Supports DHCP Client and Server Operations
-
Supports Infrastructure Mode and Roaming Service
-
Compatible with All TCP/IP Operating Systemsn
TOP
|
|
Application
Diagram
TOP
|
|
Specifications
|
Software
Specifications |
|
Basic
Setting
|
AP
Name
SSID
Radio Channel: 1~13 ETSI Domain, 1~11 FCC Domain
WEP Key: Disbale/64/128/256 bits |
|
Advanced
Setting
|
AP
mode
AP Client Mode: Remote AP BSS ID
Wireless Bridge mode: Remote bridge MAC
Multiple Bridge mode
Repeater mode: Remote AP MAC
Beacon interval: 1~1000msec
RTS threshold: 256~2432
Fragmentation threshold: 256~2346
Authentication type: open system/shared key/both
Preamble: short/long
Date rate: 1-2 / 1-2-5.5-11 / 1-2-5.5-11-22 (Mbps)
Antenna selection: left/right/diversity antenna
SSID broadcast: enable/disable
Antenna transmit power: 17/15/12/10
|
|
IP
Setting
|
LAN
IP: Obtain IP automatically / Fixed IP
LAN IP address, subnet mask, gateway
DHCP server: On/Off
DHCP client IP range: Start/End address
DNS Server
|
|
Security
|
Administrator
ID, password
MAC filter: enable/disable
Only deny PCs with MAC listed / Only allow PCs listed
MAC address (10 entries)
802.1x: Enable/Disable
802.1x encryption key length: 64/128/256-bit
RADIUS server: IP address, Port number, Shared secret
|
|
Administration
|
Configuration
backup/restore
Reset
to factory default setting
Firmware
upgrade
SNMP: Disbale/Enable, trap receiver setting |
|
Setup
Wizard
|
Set
your new password
Set
the SSID and channel
Set
encryption
Restart |
TOP
|
Hardware
Specifications
|
|
Interface
|
LAN:
One 10/100Mbps RJ-45 port
Wireless
LAN: One channel 2.4GHz ISM band
One reset button for factory default setting |
|
LED
Indicator |
Power,
LAN, Wireless LAN |
|
Antenna
Type |
Detachable
Antenna with Reverse SMA connector |
|
Power |
5VDC,
2A External power adapter |
|
Dimension |
190
(L) x 117 (W) x 32 (H) mm |
|
Environment |
Operating
Temperature: 0 ~ 50C
Storage
Temperature: -25 ~ 70C
Humidity: 10 ~ 90% non-condensing |
TOP
|
Radio
Specifications
|
|
Standard |
IEEE802.11b
plus 22Mbps PBCC Standards |
|
Emission
Type
|
Direct
Sequence Spread Spectrum (DSSS) |
|
Modulation |
BPSK
(1Mbps) / QPSK (2Mpbs) / CCK (5.5/11Mbps) / PBCC(5.5/11/22
Mbps) |
|
Frequency
Range
|
2.4GHz
Industrial Scientific Medical (ISM) Band |
|
Operating
Channel |
11
Channels (North America)
13 Channels (Europe)
14 Channels (Japan) |
|
Data
Rate |
22
/ 11 / 5.5 / 2 / 1 Mbps auto fallback and 4X mode |
|
Transmission
Power |
10/12/15/17
dBm selectable |
|
Receiver
Sensitivity |
-82
dBm (11Mbps), -90 dBm (1Mbps) |
|
Security |
Wired
Equivalent Privacy (WEP) 64 / 128 / 256 bit |
|
Media
Access Protocol |
CSMA/CA
(Collision Avoidance) with ACK |
|
Compliant |
FCC
Part 15 Class B (USA)
ETSI, CE (Europe)
WiFi Compliant |
TOP
|
|
Ordering
Information
|
Model
|
Description
|
|
GL2422-AP1
|
22Mbps
Wireless LAN Access Point with AP Client, Bridge, Repeater
functions
|
|
 |
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2003
|
|
.jpg)
Features.jpg){kind=small}
Enlarge Picture
GL2422-AP1
