Ethernet over VDSL2 PoE (PSE) LAN Extender

  

Connects over two Ethernet LANs over VDSL2 technology

  

Features

Datasheet

Application Diagram

Manual

Specifications

Enlarge Picture

Ordering

  

UVE7312-MSPE

   

 

























 

 

Overview

 

UVE7312-MSPE, Ethernet over VDSL2 PoE PSE converter, provides power supply over Ethernet cable to Ethernet PD device with voltage in the range from 44 to 57 volt. It is also an access standard technology that allows carriers to deliver data up to 100Mbps downstream and 60Mbps upstream paths over the existing copper plant. It featured single conversion technology between standard Ethernet and innovative VDSL2 over Ethernet one the telephone line for point-to-point connectivity. This converter is an ideal solution to extend the distance of local area network from 100 meters to 1,500 meters. The VDSL2 LAN Extender allows voice and data to be transmitted on the same line, saving a lot of redundant cost of wiring. Users may also select a fixed data rate or fixed SNR margin for different copper line ranging.
 

For network system integrators, this product is the best choice for planning centralized Internet access for hotels, offices, apartments and campus environment. In addition, it will allow operators to compete with cable and satellite providers by offering service such as high definition TV (HDTV), Video-on-demand, video-conferencing, FTTB, high speed internet access and advanced voice service like VoIP, over single twisted pair telephone line. The VDSL2 technology is a cost effective solution to be used as last mile line into the home or office while the ISP and Telcos use Fiber optic lines as the backbone.
 

The converter is plug-&-play without any software configuration and fully compliant with all kinds of network protocols. Moreover, rich diagnostic LEDs on the front-panel for providing the operating status of the system.
 

Features

  • ITU-T G.993.1/2 VDSL2 SG15Q4 DMT Compliance  

  • Complies with IEEE802.3u 100Base-TX standard

  • Complies with IEEE802.3  10Base-T standard

  • Complies with IEEE802.3af PoE PSE for Class 0 ~ 3

  • PSE supports output voltage from 44 ~ 57 volt

  • Supports 1 x RJ-11 Port for Line Power over DSL2

  • Supports 1 x RJ-45 ports for 10/100Mbps Ethernet

  • VDSL2 port supports up to 100Mbps downstream and 60Mbps upstream for distance up to 300 meters

  • Trellis Coding supports up to 1024 Discrete Multi-Tone (DMT) bin

  • Supports a VDSL2 connection up to 1,500 meters over single pair RJ-11 telephone copper wire

  • Features selectable Fast and Interleaved modes

  • Selectable fixed data rate and fixed SNR margin

  • Provides a piano 4 DIP switches for Master / Slave (CO/CPE) mode selection

  • Low-Latency for Video/Voice/Data applications

  • Plug-&-Play without any software configuration

  • Transparent to all kind of network protocols

  • Provides rich diagnostic LED indicators

      

 TOP

Application Diagram

Ethernet over VDSL2 PoE (PSE) Converter Application Diagram

A pair of VDSL2 converters with PoE PSE featured that provides power supply over Ethernet cable to Ethernet PD device is the best solution for bandwidth-hungry applications such as video streaming and FTTB over telephone line to extend connection for long distance.


 

Specifications

System Specifications

Standards

IEEE802.3   10BASE-T

IEEE802.3u  100BASE-TX

IEEE802.3af  PoE PSE (Power over Ethernet), Class 0 ~ 3

VDSL2 ITU-T G.993.1/2, SG15Q4 DMT compliance

Network Data Rate

Ethernet：10/100Mbps

VDSL2  ：Up to 100/60Mbps (Downstream/Upstream)

PSE

IEEE802.3af compliant with output voltage within 44 ~ 57 Volt

Safety-Extra-Low-Voltage (SELV) compliant

Maximum 15.4w power level for Class 0 ~ 3

Power auto restart with Under Voltage Lockout (UVLO) Fault Detection

Mode Control

Master Mode：Acts as Master (CO)

Slave  Mode：Acts as Slave  (CPE)

VDSL2 Speed

Downstream：100Mbps over 300m

Upstream   ： 60Mbps over 300m

LAN Interface

1 X RJ-45 connector :10/100M Fast Ethernet PoE PSE port

VDSL2 Interface

1 X RJ-11 connector : Ethernet over VDSL2 Port

Cable Connection

RJ-45 (10/100Base-TX)： UTP CAT. 3、4、5 (2-pair wire)

RJ-11 (VDSL2)： AWG26 Telephone Line

Cable Length

Ethernet：Maximum 100 meters (UTP LAN cable)

VDSL2  ：Maximum 1,500 meters (RJ-11 Telephone Cable)

 

Hardware Specifications

LED indicators

Power、LAN、DSL、PSE

Dimension

120(L) x 90W) x 29(H) mm

Weight

330g

Operating Temperature

0℃ ~ 50℃

Operating Humidity

5% ~ 95% non-condensing

Power Supply

12VDC, 2.5A, External Power Adapter

Certification

FCC、CE、RoHS

 

 

 

Package Contents

  • One Ethernet over VDSL2 PoE PSE Converter

  • One User’s Manual

  • One 12V, 2.5A External AC Power Adapter

 

 TOP

Ordering Information

Model

Description

UVE7312-MSPE

Ethernet over VDSL2 PoE PSE converter

UVE7312-MSPD

Ethernet over VDSL2 PoE PD  converter

 
 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2009