Rackmount Smart Switch

  

24-Port 10/100Mbps Rackmount Smart Switch

  

Features

Datasheet

Specifications

Manual

Ordering

Enlarge Picture

 

USH5024-R1

   

 



 

Overview

 

The device is a powerful, high-performance Fast Ethernet switch which provides smart and efficient management functions and support up to 26 ports connection, where 24 fixed ports of them are capable of 10/100Mbps with Full/Half duplex capability. An optional removable slide-in module is available with 2 ports supporting fiber connections for 100BASE-FX of type SC.
 

This switch supports various port administrations including speed/duplex/flow control, ports trunk (port aggregation), port-based / 802.1Q VLAN configurations, bandwidth control features, port mirroring functions and also some easy miscellaneous administrative features.
 

Store-and-forward switching mode promises the low latency plus eliminates all the network errors, including runt and CRC error packets. To work under full-duplex mode, transmission and reception of the frames can occur simultaneously without causing collisions as well as double the network bandwidth.
 

The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED on the front-panel can provide the operating status of individual port and whole system.

Features

  • Complies with 10BASE-T specifications of the IEEE802.3 standard

  • Complies with 100BASE-TX/100BASE-FX specifications of IEEE802.3u standard

  • Complies with IEEE802.3x Full Duplex operation and Flow Control

  • 1 * slide-in slot for optional module with 2 fiber SC ports

  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Full/Half) auto-detection

  • Supports auto MDI/MDI-X function on all ports

  • Supports Full/Half Duplex mode on 10/100Mbps speed

  • Wire-speed packet filtering and forwarding rate

  • Store-and-forward architecture filters fragment & CRC error packets

  • Supports 26 groups port-based / 802.1Q VLAN  

  • Supports 7 groups port-trunk

  • Supports bandwidth control in steps of 10% from 100% to 10% at current connecting speed

  • Internal universal switching power supply 

 TOP

Specifications

System Specifications

Standards

IEEE802.3 10Base-T standards
IEEE802.3u 100Base-TX standards
IEEE802.3u 100Base-FX standards
IEEE802.3x Full Duplex operation and flow control standards

Interface

24 * RJ-45 10/100Mbps ports (Auto MDI-X)
1 * slide-in slot for optional module with 2 fiber SC ports
One RS-232 console port

Nway Protocol Support  

Network speed: 10Mbps, 100Mbps and 1000Mbps
Duplex mode: Full and Half  

Smart Function  

26 groups port-based / 802.1Q VLAN
7 groups IEEE 802.3ad port-trunk

MAC Address Entry  

4K MAC address entries  

Memory  

384K bytes buffer for packet switching  

Filtering Forwarding Rate  

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps

Cable Connection  

RJ-45 (10BASE-T): Category 3,4,5 UTP/STP
RJ-45 (100BASE-TX): Category 5 UTP/STP
100BASE-FX: 62.5/125 or 50/125m multi-mode fiber optic

LED Indicator

System: Power
Port: 10/100Mbps

Operating Temperature  

00- 500C (320- 1220F)  

Operating Humidity

10% ~ 90% (non-condensing)  

Power Supply

100 ~ 240VAC, 50~60 Hz  

Emission

FCC Class A, CE

 

 TOP

Ordering Information

Model

Description

USH5024-R1

24-Port 10/100M Smart Switch with Optional Fiber Module Slot  

USM5024-R1.SC

2-Port 100Base-FX Fiber Module with SC Connector  

 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2003