1-Port 19W High Power at/af PoE Injector


	1-Port 19W 10/100Mbps PoE Injector

	Delivering data and power over existing network cables

	Features	Datasheet
	Application Diagram	QIG
	Specifications	Enlarge Picture
	Ordering
UPE5600-IM

Overview

UPE5600-IM is a single port 10/100M PoE PSE Injector for use in Power over Ethernet (PoE) systems. With Ethernet Input (data only) port and Output (data + power) port, UPE5600-IM may deliver up to 19 watts over existing LAN cable to power up PoE PD devices for power hungry applications such as outdoor Wireless Access Points, Security Cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented to provide up to 19W of PSE output power.

UPE5600-IM can also work in pair with UPE5600-RT (PoE Repeater) to extend Ethernet connectivity another 100 meters with power over Ethernet capability for high power PD devices, such as IP Cameras. It forwards both Ethernet and PoE for another 100m using an innovative power-processing scheme and multiple units can be deployed in series for even longer distances, with no degradation in network speed or latency. UPE5600-RT itself is powered by UPE5600-IM, so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras two to three times further than previously possible without going to fiber.

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5600-IM can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.

Features

IEEE802.3at compliant with 3-event classification
IEEE802.3af backward compatible
Provides up to 19 watt PoE PSE Power Injector
2 x RJ-45 Power over Ethernet (PoE) In & Out ports
Supports 10/100Mbps RJ-45 Fast Ethernet port
Complies with IEEE802.3u 100Base-TX standard
Complies with IEEE802.3 10Base-T standard
Automatic detection and protection of nonstandard Ethernet terminals
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
Supports auto MDI-X function for switch-to-station & switch-to-switch connection with non crossover cable
Operates at max. packet filtering and forwarding rate
Advanced Store-and-Forward transmission method
Easy-to-read LEDs provide instant operating feedback
Plug-&-Play without any software configuration
Transparent to all kind of network protocols
Convenient Internal switching power 100 ~ 240V AC

TOP

Application Diagram

1-Port 19W High Power PoE Injector Application Diagram

UPE5600-IM is a single port PoE Injector that delivers up to 19 watts over existing LAN cable to power up PoE PD devices for power hungry applications such as Wireless Access Points (AP), Security Cameras and IP Phones at farther distance.

Specifications

System Specifications
Ethernet Standard	IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x Full duplex operation and flow control IEEE802.3at/af Power over Ethernet
Interface	1 x RJ-45 Ethernet-IN Port (Data only) 1 x RJ-45 PoE-Out Port (Data and Power)
Power	Input:100 ~ 240V, 50-60Hz Output:52VDC at full load PoE Power:19 Watt Maximum
Ping Assignment & Polarity	4/5 (+), 7/8 (-)
Network Speed	10/100Mbps Full/Half duplex mode auto detection
Diagnostic LED	Power、PoE
Cable Connection	10Mbps：UTP/STP Catalog 3 or Better, Max. 100 Meters 100Mbps：UTP/STP Catalog 5 or Better, Max. 100 Meters
Filtering / Forwarding Rate	10Mbps：14,880pps/14,880pps 100Mbps：148,800pps/148,800pps
Installation	Parallel slide-in design to ease the installation
Operating Temperature	-10° ~ 45°C
Operation Humidity	5% ~ 95% (non-condensing)
Dimension	144 (L) x 60 (W) x 40 (H) mm
Weight	350g (Net)
Emission Certification	EN 60950:2006

Package Contents

One 1-port Gigabit High Power PoE Injector
One Quick Installation Guide (QIG)
One External Power Cord

TOP

Ordering Information

Model	Description
UPE5600-IM	1-Port 10/100Mbps 19W PoE Injector ( No PD Detection )
UPE5600-HST	1-Port 10/100Mbps 30W High Power PoE Splitter

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.