1-Port 40W High Power PoE Injector

  

Delivering data and power over existing network cables

 

Features

Datasheet

Application Diagram

QIG

Specifications

Enlarge Picture

Ordering

 

UPE5600-HIT

   


 







 

Overview

 

UPE5600-HIT is a high power PoE PSE Injector for use in Power over Ethernet (PoE) systems. With Ethernet Input (data only) port and Output (data + power) port, UPE5600-HIT may deliver up to 30~50 watts over existing LAN cable to power up PoE PD devices for power hungry applications such as Wireless Access Points (AP), Security Cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented to provide up to 30~50W of PSE output power.

 

UPE5600-HIT can also work in pair with UPE5600-RT (PoE Repeater) to extend Ethernet connectivity another 100 meters with power over Ethernet capability for high power PD devices, such as 18W IP Cameras. It forwards both Ethernet and PoE for another 100m using an innovative power-processing scheme and multiple units can be deployed in series for even longer distances, with no degradation in network speed or latency. UPE5600-RT itself is powered by UPE5600-HIT, so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras two to three times further than previously possible without going to fiber or installing midspan power source.

 

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5600-RT can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.


 

Features

  • 30 ~ 50 watt high power PoE PSE Power Injector

  • IEEE802.af Power over Ethernet (PoE) standard  

  • Complies with IEEE802.3u 100Base-TX standard

  • Complies with IEEE802.3  10Base-T standard

  • 2 x RJ-45 Power over Ethernet (PoE) In & Out ports

  • 1 x Input 12~20VDC power jack for external power

  • Delivers power over Ethernet (PoE) to remote devices

  • Supports NWay protocol for speed (10/100Mbps) and
    duplex mode (Half/Full) detection

  • Supports auto MDI-X function for switch-to-station &
    switch-to-switch connection with non crossover cable

  • Supports full and half duplex operation

  • Operates at max. packet filtering and forwarding rate

  • Advanced Store-and-Forward transmission method

  • Easy-to-read LEDs provide instant operating feedback

  • Desktop size and wall mountable design  

  • Plug-&-Play without any software configuration

  • Transparent to all kind of network protocols

  • No power is required

      

 TOP

Application Diagram

1-Port 40W High Power PoE Injector Application Diagram

UPE5600-HIT is a high power PoE Injector that delivers up to 30~50 watts over existing LAN cable to power up PoE PD devices for power hungry applications such as Wireless Access Points (AP), Security Cameras and IP Phones at farther distance.

 

RJ-45 Connector & Pinout


 

Specifications

System Specifications

Ethernet Standard

IEEE802.3    10BASE-T

IEEE802.3u   100BASE-TX

IEEE802.3x   Full duplex operation and flow control

IEEE802.3af  Power over Ethernet

Interface

1 x RJ-45 Ethernet-IN Port (Data only)

1 x RJ-45 PoE-Out Port (Data and Power)

1 x DC Input Power Jack ( 2.1 x 5.5 x 9 mm )

Power

Input12 ~ 20VDC

Output56VDC at full load

PoE Power30 ~ 50 Watt Maximun

Uplink

Auto MDI/MDI-X ( Auto Crossover )

Network Speed

10/100Mbps Full/Half duplex mode auto detection

Diagnostic LED

PowerLAN INLAN OUT

Cable Connection

10MbpsUTP/STP Catalog 3 or Better, Max. 100 Meters

100MbpsUTP/STP Catalog 5 or Better, Max. 100 Meters

Filtering / Forwarding Rate

10Mbps14,880pps/14,880pps

100Mbps148,800pps/148,800pps

Installation

Desktop Size and Wall Mountable ( Included Wall Mounting Screws)

Operating Temperature

0 ~ 50C

Operation Humidity

5% ~ 95% (non-condensing)

Dimension

120 (L) x 90 (W) x 28 (H) mm

Weight

330g (Net)

Emission Certification

CEFCC Rule Part 15RoHS

 

 

 

 

Package Contents

  • One 1-port High Power PoE Injector

  • One User’s Manual

  • One External Power Adapter

  • One Set of Wall Mounting Screws

 

 TOP

Ordering Information

Model

Description

UPE5600-HIT

1-Port 40W High Power PoE (Power over Ethernet) Injector

UPE5600-HITR

8-Bay 19 Chassis for up to 8 pcs of UPE5600-HIT 50W High Power PoE Injector

 

 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2010