24-Port 10/100M PoE + 2-port Gigabit Switch

  

Delivering data and power over existing network cables

  

Features

Datasheet

Application Diagram

User Manual

Specifications

Enlarge Picture

Ordering

  

UPE5424-2G

   

 







 

Overview

 

UPE5424-2G is a 24-port 10/100Mbps PoE Switch with additional 2 of shared Gigabit Mini-GBIC (SFP) slots or UTP Copper ports allows future expanding to alternate transmission media like optical fiber for the long-distance communication to the server, storage or other switching devices that providing superior performance with exceptional value.

 

It supports IEEE802.3at/af Power over Ethernet (PoE) standard and supplies 370 Watts in total for 15.4W per port on all the PoE-On ports, and up to 30 watts per port to power any 802.3at/af compliant power devices such as IP-based products like outdoor PoE Wireless Access Point, PoE IP phone, outdoor PoE Network security camera, and more.
 

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5424-2G can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.

The UPE5424-2G is plug-n-play without software to configure and also supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is also fully rack-mountable unit that is easy to integrate into your network infrastructure.  


 

Features

  • IEEE802.3at/af Power over Ethernet (PoE) standard

  • Complies with IEEE802.3/3u/3ab/3z/3x standards

  • 24 x RJ-45 10/100M PoE ports with maximum 30W per port,
    total power budget is 370W (15.4W/port)

  • 2 X Gigabit UTP/SFP slots (copper/Fiber) combo Ports

  • Supports PoE Power Device (PD) classification identify

  • Provides over current and circuit shorting protection

  • 8.8Gbps switch fabric, non-blocking switch architecture

  • Supports NWay protocol for speed (10/100/1000Mbps)
    and duplex mode (Half/Full) detection

  • All ports with auto MDI-X function for switch-to-station
    & switch-to-switch connection with non crossover cable

  • Operates at max. packet filtering and forwarding rate

  • Supports Store and forward transmission method

  • Easy-to-read LEDs provide instant operating feedback

  • Supports 4K MAC address entries in whole system  

  • 2.5 Mbit buffer memory

  • 19" rack mount size with holder

  • Convenient Internal switching power 100 ~ 240V AC

      

 TOP

Application Diagram

24-port 10/100Mbps PoE Switch with 2-port Gigabit Application Diagram


 

 

Specifications

System Specifications

Standards

IEEE802.3    10BASE-T

IEEE802.3u   100BASE-TX
IEEE802.3ab 1000BASE-T

IEEE802.3z 1000BASE-SX/LX

IEEE802.3x   Full duplex operation and flow control

IEEE802.3af  Power over Ethernet

Interface

24 x 10/100Mbps RJ-45 PoE ports ( port 1~24 )
2 x 10/100/1000Mbps combo Gigabit UTP Port / Mini-GBIC Slots

PoE Spec

PoE Power Budget : 370W (15.4w/port)

Up to 30W for each PoE Port

PD Classification Identify

PoE Over Current Protection
PoE Circuit Sorting Protection

Power Pin Assignment

1/2 (+), 3/6 (-)

Switch Fabric

8.8Gbps

PoE Power Output

Per Port 48V DC, Max. 15.4 Watts (802.3af), Max. 30 Watts (802.3at)

Uplink

Auto MDI/MDI-X ( Auto Crossover )

Network Speed

10/100Mbps or 10/100/1000Mbps Full/Half duplex mode auto detection

Diagnostic LED

Power, PoE Link, PoE, GE Link, GE

MAC Address Entry

4K MAC entries

Buffer Memory

2.5Mbit for the whole system

Filtering / Forwarding Rate

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
1000Mbps :1,488,100pps

Installation

19" Rack Mountable ( Included 19" Bracket )

Operating Temperature

0 ~ 50C (32 ~ 104F)

Operation Humidity

10% ~ 90% (non-condensing)

Dimension

440 (L) x 200 (W) x 44 (H) mm, 1U Height

Weight

3.8kg (Net)

Power Requirement

100~240V AC, 50-60Hz, Internal Universal Switching Power Supply

Emission Certification

CE, FCC Part 15 class A

 

 

 

 

Package Contents

  • One 24-port 10/100M PoE + 2-Port Gigabit Switch

  • One User's Manual CD-ROM

  • One Internal Power Cord

  • One Set of 19" Mounting Bracket and Screws

 

 TOP

Ordering Information

Model

Description

UPE5424-2G

24-port 10/100M PoE + 2-port Gigabit Combo Switch, total 370W

UPE5424-2G16

24-port 10/100M Switch with 16-port PoE + 2-port Gigabit Combo, total 250W

 
 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2013