|
Overview
UPE5416-8E is a 16-port 10/100Mbps Fast Ethernet Switch with built-in 8 PoE high power ports. It supports IEEE802.3at/af Power over Ethernet (PoE) standard and supplies 120 Watts in total for full 15.4W all the PoE-On ports, and up to 30 watts per port to power any 802.3at compliant power devices such as IP-based products like outdoor PoE Wireless Access Point, PoE IP phone, PoE Network security camera, and more.
The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5416-8E can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.
UPE5416-8E has outstanding performance and high efficiency. It fulfills the needs of connecting the partners of network with best network speed and duplex mode automatically. Duplex mode also doubles the bandwidth by enabling two-ways communication. All ports support auto MDI/MDI-X, connecting switch to switch is more convenient with non-crossover cable.
The UPE5416-8E is plug-n-play without software to configure and also supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is also fully rack-mountable unit that is easy to integrate into your network infrastructure.
|
Features
-
IEEE802.3at/af Power over Ethernet (PoE) standard
-
Complies with IEEE802.3 and IEEE802.3u standards
-
8 x RJ-45 10/100M PoE ports with maximum 30W per port, total power budget is 120W (15.4W/port)
-
16 x RJ-45 10/100Mbps auto speed switch ports
-
Supports PoE Power Device (PD) classification identify
-
Provides over current and circuit shorting protection
-
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
-
All ports with auto MDI-X function for switch-to-station & switch-to-switch connection with non crossover cable
-
Supports full and half duplex operation on all ports
-
Operates at max. packet filtering and forwarding rate
-
Store and forward transmission method
-
Easy-to-read LEDs provide instant operating feedback
-
Supports 4K MAC address entries in whole system
-
1.25 Mbit buffer memory
-
19" rack mount size with holder
-
Convenient Internal switching power 100 ~ 240V AC
TOP
|
Application
Diagram
10/100Mbps PoE Switch Application Diagram |
|
The 16-port 10/100M Switch with 8-port PoE that supplies up to 30 watts per port to power any IEEE802.3at/af compliant
power devices for IP-based products such as outdoor PoE Wireless Access Point, PoE IP phone, outdoor PoE network
security camera and more to deliver power and data over existing network cable infrastructure.
|
|
Specifications
System
Specifications |
Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3x Full
duplex operation and flow control
IEEE802.3at/af Power over Ethernet |
Interface |
16 x 10/100Mbps RJ-45 Switch ports ( port 1~16 )
8 x 10/100Mbps RJ-45 PoE ports ( port 1~8 )
|
PoE Spec |
PoE Power Budget : 120W (15.4W/Port)
Up to 30W for each PoE Port
PD Classification Identify
PoE Over Current Protection
PoE Circuit Sorting Protection
|
Power Pin Assignment |
1/2 (+), 3/6 (-) |
Throughput |
2.38Mpps (Packet per second) |
Switch Fabric |
3.2Gbps |
PoE Power Output |
Per Port 56V DC, Max. 30 Watts (802.3at) |
Uplink |
Auto MDI/MDI-X ( Auto Crossover ) |
Network Speed |
10/100Mbps Full/Half duplex mode auto detection |
Diagnostic LED |
Power, PoE Act/Status, PoE Link/Act |
MAC Address Entry
|
4K MAC entries |
Buffer Memory |
1.25M bits for the whole system |
Filtering / Forwarding Rate |
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
|
Installation |
19" Rack Mountable ( Included 19" Bracket ) |
Operating Temperature |
0 ~ 50C (32 ~ 104F) |
Operation Humidity |
5% ~ 90% (non-condensing) |
Dimension |
480 (L) x 200 (W) x 44 (H) mm |
Weight |
2.7kg (Net) |
Power Requirement |
100~240V AC, 50-60Hz, 3A, Internal Universal Switching Power Supply |
Emission Certification |
CE, FCC Part 15 class A |
Package Contents
TOP
|
Ordering
Information
Model
|
Description
|
UPE5416-8E |
16-port 10/100M Fast Ethernet Switch with 8 x PoE Ports, total 120W |
|
|
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2013
|
|