8-Port 10/100Mbps High Power PoE Switch

  

Delivering data and power over existing network cables

  

Features

Datasheet

Application Diagram

User Manual

Specifications

Enlarge Picture

Ordering

  

UPE5408-E

   

 







 

Overview

 

UPE5408-E is an 8-port 10/100Mbps Fast Ethernet Switch with built-in 8 PoE ports. It supports IEEE802.3at/af Power over Ethernet (PoE) standard and supplies 120 Watts in total for all the PoE-On ports, and up to 30 watts per port to power any 802.3at compliant power devices such as IP-based products like outdoor PoE Wireless Access Point, PoE IP phone, outdoor PoE Network security camera, and more.

 

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5408-E can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.
 

UPE5408-E has outstanding performance and high efficiency. It fulfills the needs of connecting the partners of network with best network speed and duplex mode automatically. Duplex mode also doubles the bandwidth by enabling two-ways communication. All ports support auto MDI/MDI-X, connecting switch to switch is more convenient with non-crossover cable.

The UPE5408-E supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is ideal for desktop or is allowed to install in a 19" cabinet by rack-mount kits.


 

Features

  • IEEE802.3at/af Power over Ethernet (PoE) standard

  • Complies with IEEE802.3 and IEEE802.3u standards

  • 8 x RJ-45 10/100M PoE ports with maximum 30W per port,
    total power budget is 120W (15.4W/port)

  • 8 x RJ-45 10/100Mbps auto speed switch ports

  • Supports PoE Power Device (PD) classification identify

  • Provides over current and circuit shorting protection

  • Supports NWay protocol for speed (10/100Mbps) and
    duplex mode (Half/Full) detection

  • All ports with auto MDI-X function for switch-to-station &
    switch-to-switch connection with non crossover cable

  • Supports full and half duplex operation on all ports

  • Operates at max. packet filtering and forwarding rate

  • Store and forward transmission method

  • Easy-to-read LEDs provide instant operating feedback

  • Supports 1K MAC address entries in whole system  

  • 64KB buffer memory

  • Desktop size with 19" rack mountable bracket

  • Convenient Internal switching power 100 ~ 240V AC

      

 TOP

Application Diagram

8-port 10/100Mbps PoE Switch Application Diagram

The 8-port PoE switch supplies 802.3af full 15.4W per port or supplies 802.3at high power up to 30 watts per port to power any IEEE802.3af/at compliant power devices for IP-based products such as PoE Wireless Access Point, PoE IP phone, PoE network security camera and more to deliver power and data over existing network cable infrastructure.


 

 

Specifications

System Specifications

Ethernet Standard

IEEE802.3    10BASE-T

IEEE802.3u   100BASE-TX

IEEE802.3x   Full duplex operation and flow control

IEEE802.3at/af Power over Ethernet

Interface

8 x 10/100Mbps RJ-45 PoE ports ( port 1~8 )

PoE Spec

PoE Power Budget : Max.123.2W (15.4W/Port)
Up to 30W for each PoE Port
PD Classification Identify
PoE Over Current Protection
PoE Circuit Sorting Protection

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Output

56V/DC per port Output 30W max. per port

Network Speed

10/100Mbps Full/Half duplex mode auto detection

Diagnostic LED

Power, PoE Act/Status, PoE Link/Act, PoE

MAC Address Entry

1K MAC entries

Buffer Memory

64KB for the whole system

Filtering / Forwarding Rate

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps

Installation

11" Desktop Size, 19" Rack Mountable ( Included 19" Bracket )

Operating Temperature

0 ~ 45C

Operation Humidity

10% ~ 90% (non-condensing)

Dimension

280 (L) x 185 (W) x 44 (H) mm

Weight

1.6kg (Net)

Power Requirement

100~240V AC, 50-60Hz, Internal Universal Switching Power Supply

Emission Certification

CE, FCC, LVD

 

 

 

 

Package Contents

  • One 8-port 10/100M PoE Ethernet Switch

  • One User's Manual CD-ROM

  • One Internal Power Cord

  • One Set of 19" Mounting Bracket and Screws

 

 TOP

Ordering Information

Model

Description

UPE5408-E

8-port 10/100M Fast Ethernet PoE Switch ( total 120W )

 
 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2013