8-Port 10/100M Switch with 4-Port PoE

  

Delivering data and power over existing network cables

  

Features

Datasheet

Application Diagram

User Manual

Specifications

Enlarge Picture

Ordering

 

UPE5408-4E

   


 




Max.30w

19"barcket


 

Overview

 

UPE5408-4E (v2) is an 8-port 10/100Mbps Switch with built-in 4 PoE high power ports. It supports IEEE802.3at/af Power over Ethernet (PoE) standard and supplies 65 Watts in total for full 15.4W all the PoE-On ports, and up to 30 watts per port to power any 802.3at compliant power devices such as IP-based products like outdoor PoE Wireless Access Point, PoE IP phone, PoE Network security camera, and more.

 

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5408-4E (v2) can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.
 

UPE5408-4E (v2) has outstanding performance and high efficiency. It fulfills the needs of connecting the partners of network with best network speed and duplex mode automatically. Duplex mode also doubles the bandwidth by enabling two-ways communication. All ports support auto MDI/MDI-X, connecting switch to switch is more convenient with non-crossover cable.

The UPE5408-4E (v2) supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is compact in size, making it ideal for desktop or is allowed to install in 19 cabinet by rack-mount holders.


 

Features

  • IEEE802.3at/af Power over Ethernet (PoE) standard

  • 8 x RJ-45 10/100Mbps auto speed switch ports

  • Built-in 4 x 10/100M PoE ports with max. up to 30W per port, total power budget is 65W (15.4W/port)

  • Complies with IEEE802.3 and IEEE802.3u standards

  • Supports PoE Power Device (PD) classification identify

  • Provides over current and circuit shorting protection

  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection

  • All ports with auto MDI-X function for switch-to-station & switch-to-switch
    connection with non crossover cable

  • Supports full and half duplex operation on all ports

  • Operates at max. packet filtering and forwarding rate

  • Store-and-Forward transmission method

  • Easy-to-read LEDs provide instant operating feedback

  • Supports 1K MAC address entries in whole system  

  • Supports 64KB buffer memory

  • Convenient internal switching power 100 ~ 240V AC

  • 11 metal case with 19 Rack-mount holders

      

 TOP

Application Diagram

8-port 10/100Mbps Switch with 4 Port PoE Application Diagram

The 8-port 10/100M Switch with 4-port PoE that supplies up to 30 watts per port to power any IEEE802.3at/af compliant power devices for IP-based products such as outdoor PoE Wireless Access Point, PoE IP phone, outdoor PoE network security camera and more to deliver power and data over existing network cable infrastructure.

 

 

Specifications

System Specifications

Ethernet Standard

IEEE802.3    10BASE-T

IEEE802.3u   100BASE-TX

IEEE802.3x   Full duplex operation and flow control

IEEE802.3af / at  Power over Ethernet

Interface

4 x 10/100Mbps RJ-45 PoE ports ( port 1~4 )
8 x 10/100Mbps RJ-45 port ( port 4~8 )

PoE Spec

PoE Power Budget : 65W (15.4W/port)

Up to max. 30W per PoE Port

PD Classification Identify ( Remote PoE PD Detection )

PoE Over Current Protection
PoE Circuit Sorting Protection

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Output

54VDC per port Output 30W max. per port (802.3at)

Network Speed

10/100Mbps Full/Half duplex mode auto detection

Diagnostic LED

Power, PoE Act/Status , Link/Act, PoE

Uplink

Auto MDI/MDI-X ( Auto Crossover )

MAC Address Entry

1K MAC entries

Buffer Memory

64KB for the whole system

Filtering / Forwarding Rate

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps

Installation

11 Desktop Size, 19 Rack Mountable ( Included 19 Bracket)

Operating Temperature

0 ~ 40C

Operation Humidity

10% ~ 90% (non-condensing)

Dimension

280 (L) x 127 (W) x 44 (H) mm

Weight

1.2kg (Net)

Power Supply

Input :100~240V AC, 50 ~60Hz, Internal Universal Switching Power Supply

Emission Certification

CEFCCLVD

 

 

 

Package Contents

  • One Power over Ethernet (PoE) Repeater

  • One User’s Manual

  • One Set of Wall Mounting Screws

 TOP

Ordering Information

Model

Description

UPE5408-4E

8-port 10/100M Switch with 4 x PoE ports ( total 65W)

 

 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2010