4-Port PoE + 1-Port Uplink 10/100M Switch

  

Delivering data and power over existing network cables

  

Features

Datasheet

Application Diagram

User Manual

Specifications

Enlarge Picture

Ordering

 

UPE5405-4HM

   


 







 

Overview

 

UPE5405-4HM is a 5-port 10/100Mbps Fast Ethernet Switch with built-in one uplink port + 4-port High Power PoE capability. With 4 DIP switches, each PoE port can be manually set for On-Off control. It is able to supply high power up to 48W Per PoE port.

 

It supports IEEE802.3af and IEEE802.at Power over Ethernet (PoE) standard and supplies 120 Watts in total for all the PoE-On ports. It can use with EUSSO PoE Repeater to extend another 100 meters or several 100 meters if multiple Repeaters are used to power any 802.3af/at compliant power devices such as IP-based products like outdoor PoE Wireless Access Point, outdoor PoE IP phone, outdoor PoE Network security camera, and more.
 

The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5405-4HM can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments. 

The UPE5405-4HM supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is compact in size, making it ideal for desktop or is allowed to install into an 8-bay 19" cabinet for central management.


 

Features

  • Compliant with IEEE802.3af & Pre-802.3at standard 

  • Complies with IEEE802.3 and IEEE802.3u standards

  • 5 x RJ-45 10/100Mbps auto speed switch ports

  • Built-in 4 x 10/100M PoE ports with maximum up to 48W per port + 1 x 10/100M uplink port

  • Provides over current and circuit shorting protection

  • Provides DIP switch for per-port PoE enabled/disabled

  • Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection

  • All ports with auto MDI-X function for switch-to-station & switch-to-switch
    connection with non crossover cable

  • Supports full and half duplex operation on all ports

  • Store-and-Forward transmission method

  • Easy-to-read LEDs provide instant operating feedback

  • Supports 1K MAC address entries in whole system  

  • 48K bits buffer memory

  • Slide-In design for 8-bay 19" rack chassis (option)

  • External Power Adapter : 90 ~ 260V AC

      

 TOP

Application Diagram

10/100Mbps PoE Switch Application Diagram

The 5-port PoE switch supplies up to 15.4 watts per port to power any IEEE802.3af compliant power devices for IP-based products such as PoE Wireless Access Point, PoE IP phone, PoE network security camera and more. It's able to install into a 19" 8-Bay Chassis for up to 32-port PoE Switches.


 

 

Specifications

System Specifications

Standards

IEEE802.3    10BASE-T

IEEE802.3u   100BASE-TX

IEEE802.3x   Full duplex operation and flow control

IEEE802.3af/3at Power over Ethernet

Interface

4 x 10/100Mbps RJ-45 High Power PoE ports ( port 1~4 )
1 x 10/100Mbps RJ-45 Uplink port

PoE on each port

Total PoE Power : Max. 120W by manual Setup (30W/port)
Per PoE Port : Max. 48W ( PoE DIP ON )

PoE Spec

PD Classification Identify

PoE Over Current Protection

PoE Circuit Sorting Protection

PoE power on RJ-45 pin3,6 for power + /pin 1,2 for power

Output Power Pin

4, 5, 7, 8

Uplink

Auto MDI/MDI-X ( Auto Crossover )

Network Speed

10/100Mbps Full/Half duplex mode auto detection

Diagnostic LED

Power,UPlink,LAN 1~4 Port,PoE 1~4 Port

MAC Address Entry

1K MAC entries

Buffer Memory

48K bits for the whole system

Filtering / Forwarding Rate

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps

Installation

Desktop Size, Wall-Mounting, 8-Bay 19" Rack Chassis ( Optional )

Operating Temperature

0 ~ 45C (32 ~ 104F)

Operation Humidity

10% ~ 90% (non-condensing)

Dimension

120 (L) x 90 (W) x 28 (H) mm

Weight

350g (Net)

Power Supply

Input :90~260V AC,50-60Hz, External Power Adapter
Output : 48VDC/2.7A

Emission Certification

CEFCC

 

 

 

 

Package Contents

  • One 5-port 10/100M PoE Ethernet Switch

  • One User's Manual CD-ROM

  • One 48V DC/1.3A External Power Adapter

  • One Set of Wall-mounting Kits

 

 TOP

Ordering Information

Model

Description

UPE5405-4HM

5-port 10/100M Switch with 4 x High Power PoE ports + 1 x uplink port, total120W

UPR5408-R

8-Bay 19" Rack Chassis up to 32-Ports for UPE5405-4E/4M/4GE

 

 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2010