|
Overview
UPE5405-4GET2 is a 5-port 10/100/1000Mbps Switch with built-in four high power PoE ports + one uplink port. It supports IEEE802.3at/af Power over Ethernet (PoE) standard and supplies 120 Watts in total for all the PoE-On ports, and up to 30 watts per port to power any 802.3at/af compliant power devices such as IP-based products like PoE Wireless Access Point, PoE IP phone, PoE Network security camera, and more.
The advantage of PoE function is to provide power and data over existing network cables. It eliminates the need for electricians or extension cords while installing new expanding equipments. Therefore, UPE5405-4GET2 can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost. This PoE technology is suitable for small business, school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.
UPE5405-4GET2 has outstanding performance and high efficiency. It fulfills the needs of connecting the partners of network with best network speed and duplex mode automatically. Duplex mode also doubles the bandwidth by enabling two-ways communication. All ports support auto MDI/MDI-X, connecting switch to switch is more convenient with non-crossover cable.
The UPE5405-4GET2 supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection. It is compact in size, making it ideal for desktop or is allowed to install in an 8-Bay 19” cabinet by rack-mount kits.
|
Features
-
IEEE802.3af Power over Ethernet (PoE) standard
-
Complies with IEEE802.3, 802.3u, 802.3ab standards
-
5 x RJ-45 10/100/1000Mbps auto speed switch ports
-
Built-in 4 x 10/100/1000M PoE ports with maximum 30W per port + 1 x 10/100/1000M uplink port
-
Supports PoE Power Device (PD) classification identify
-
Provides over current and circuit shorting protection
-
Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (Half/Full) detection
-
All ports with auto MDI-X function for switch-to-station & switch-to-switch connection with non crossover cable
-
Supports full and half duplex operation on all ports
-
Operates at max. packet filtering and forwarding rate
-
Store-and-Forward transmission method
-
Easy-to-read LEDs provide instant operating feedback
-
Supports 1K MAC address entries in whole system
-
104kb buffer memory
-
Slide-In design for 32-port 19" rack chassis (option)
TOP
|
Application
Diagram
1-Port PoE Repeater for 300m Ethernet Connection Application
Diagram |
|
The 5-port Gigabit PoE switch supplies up to 15.4 watts per port to power any IEEE802.3af compliant power devices
for IP-based products such as PoE Wireless Access Point, PoE IP phone, PoE network security camera
and more. It's able to install into a 19" 8-Bay Chassis for up to 32-port PoE Switch.
|
|
Specifications
System
Specifications |
Standards |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T
IEEE802.3x Full
duplex operation and flow control
IEEE802.3af Power over Ethernet |
Interface |
4 x 10/100/1000Mbps RJ-45 PoE ports ( port 1~4 )
1 x 10/100/1000Mbps RJ-45 Uplink port
|
PoE Spec |
PoE Power Budget : 120W (30/port)
Up to 30W for each PoE Port
PD Classification Identify
PoE Over Current Protection PoE Circuit Sorting Protection
PoE power on RJ-45 pin1,2 for power + /pin 3,6 for power |
Uplink |
Auto MDI/MDI-X ( Auto Crossover ) |
Backplane |
Backplane 10Gbps |
Network Speed |
10/100/1000Mbps Full/Half
duplex mode auto detection |
Diagnostic LED |
Power,UPlink,LAN 1~4 Port,PoE 1~4 Port |
MAC Address Entry
|
1K MAC entries |
Buffer Memory |
104KB for the whole system |
Filtering / Forwarding Rate |
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps 1000Mbps :1,488,100pps
|
Installation |
Desktop Size, Wall-Mounting, 8-Bay 19" Rack Chassis ( Optional ) |
Operating Temperature |
0 ~ 50C (32 ~ 104F) |
Operation Humidity |
10% ~ 90% (non-condensing) |
Dimension |
120 (L) x 90 (W) x 28 (H)
mm |
Weight |
350g (Net) |
Power Supply |
Input :100~240V AC, 50-60Hz, External Power Adapter
Output : 48VDC/1.35A max 65W
|
Emission Certification |
CE、FCC |
Package Contents
-
One 5-port 10/100/1000M PoE Ethernet Switch
-
One User's Manual CD-ROM
-
One 48V DC External Power Adapter
-
One Set of Wall-mounting Kits
TOP
|
Ordering
Information
Model
|
Description
|
UPE5405-4GET2 |
5-port 10/100M Switch with 4 x PoE ports + 1 x uplink port, total 65W |
UPR5408-R |
8-Bay 19" Rack Chassis up to 32-Ports for UPE5405-4E/4M/4GE |
|
|
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2010
|
|