|
|
|
Overview
The
Gigabit Managed Cluster is a powerful, high-performance, high port density
networking system, which can upgrade and integrate your existing network from
10/100Mbps to a simplex, efficient, centralized management environment and very
high-speed network architecture. As all members operate as teamwork, all
connected members of the family are treated as a Single-Managed device.
The
device is a 10/100/1000Mbps Gigabit Ethernet Clustering switch with fourteen
Gigabit RJ-45 ports and two Gigabit slide-in slots on the rear panel for
optional fiber/copper Gigabit modules.
Out
of the ordinary dumb switches, the Gigabit Clustering Switch embedded advanced
management capability; that the device can be remote managed by Telnet, SNMP
manager and Internet browser. This is much useful for system manager to monitor
and control the system efficiently.
The
switch is plug-n-play without any software to configure and also fully compliant
with all kinds of network protocols. Moreover, the rich diagnostic LED on the
front-panel provides the operating status of individual port and whole system.
TOP
|
|
Features
-
Complies IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE
802.3z/ab standards
-
Complies IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE
802.3z/ab standards
-
The whole management stack can stack up to 8 sets
-
14 * 10/100/1000Mbps RJ-45 ports
-
2 * 1000Mbps Copper/Fiber slide-in slots (for optional module)
-
Proprietary management bus extend up to 800 meters for management
stacking
-
Every switching port is automatically cross-over detection (MDI/MDI-X
auto-detected)
-
Supports IGMP snooping, MIB counters, port sniffering
-
Supports Port Aggregation and up to 8 groups
-
Supports 802.1Q VLAN and up to 255 groups
-
Supports 802.1D Spanning Tree
-
One RS-232 female console connector
-
19” rack mountable
-
Internal universal switching power supply
TOP
|
|
Specifications
|
System
Specifications
|
|
Standards
|
IEEE802.3
10Base-T standards
IEEE802.3u
100Base-TX standards
IEEE802.3ab
for 1000Base-T standards
IEEE802.3z
for 1000Base-SX standards
IEEE802.3x
Full Duplex operation and flow control standards
IEEE802.1Q
VLAN tag (IVL) standards
IEEE802.1D
Spanning Tree Protocol
|
|
Interface
|
14 *
10/100/1000Mbps RJ-45 ports
2 *
Gigabit fiber/copper slide-in slots
Proprietary
management bus
HUB ID
for management stack
One
system reset button
One
RS-232 console port
|
|
Nway
Protocol Support
|
Network
speed: 10Mbps, 100Mbps and 1000Mbps
Duplex
mode: Full and Half
|
|
Management
|
Embedded
web-based management interface
Telnet,
SNMP for remote management
|
|
MAC
Address Entry
|
4K MAC
entries
|
|
Memory
|
2Mbit
for packet switching
8MB
SDRAM for run time data storage
2MB
Flash EPROM for cooperation and configuration data storage
|
|
LED
Indicator
|
System:
Power, RTC, Status 0, Status 1, link (stack)
Port: Fixed－1000M;
100M; 10M; ACT
Slide-in
slot－LINK/ACT
|
|
Operating
Temperature
|
0o-
50oC (32o- 122oF)
|
|
Operating
Humidity
|
10% ~
90% (non-condensing)
|
|
Power
Supply
|
100 ~
240VAC, 50~60 Hz
|
|
Emission
|
FCC
Class A, CE
|
TOP
|
|
Ordering
Information
|
Model
|
Description
|
|
UGS5816-RM
|
14-Port
+ 2-Port Optional Gigabit Stackable Management Switch
|
|
UGM5816-T
|
1-Port
Gigabit Copper module (1000Base-T, UTP) for UGS5816-RM/RS and UGS5224-RM
(back panel slot)
|
|
UGM5816-SX
|
1-Port
Gigabit Fiber module (1000Base-SX, SC) for UGS5816-RM/RS and UGS5224-RM
(back panel slot)
|
|
 |
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2003
|
|
.jpg)
Features.gif){kind=small}
Enlarge Picture
UGS5816-RM
