UCT6120


	UCT6120-ST/SC/SC.S

	*UTP to Multi-Mode*

	Features	Datasheet
	Specifications	Enlarge Picture
	Ordering

UCT6120-ST/SC/SC.S

Overview

IEEE802.3u Ethernet supports two types media for network connection such as 10/100Base-TX and 100Base-FX. The bridge media converter is designed with a switch controller and buffer memory that connects two types segments operation smoothly.

A special designed feature LFP (Link Fault Pass Through) enhances the TP-Fiber link integrity and conformity. Either one of TP or Fiber port is in link-fail state, the LFP converter forces the other port to be at link-disabled state. This converter can be used as a standalone unit or as a slide-in module to the 19" converter rack (up to 10 units) for use at a central wiring closet.

The UCT6120 family is a Fast Ethernet 100Base-TX or Ethernet 10Base-T to 100Base-FX fiber converter. It features one STP RJ-45 port and one port to fiber optic cabling. UTP Nway auto-negotiation set UTP speed and full- or half-duplex mode operation. Full duplex cabling provides bandwidth of up to 200Mbps and allows the transmission distance up to 2 Km over multimode fiber and up to 100Km over single mode fiber.

Features

Complies with IEEE802.3, IEEE802.3u standard
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) detection
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
CAT 5 UTP cable up to 100 meters
Standard SC/ST multimode fiber interface
Optional SC single mode for longer distance

TOP

Specifications

Hardware
Standards	IEEE802.3u 100Base-TX/100Base-FX IEEE802.3 10Base-T
UTP Cable	CAT 5 cable for 10/100Mbps and up to 100-meter
Fiber Cable	50/125, 62.5/125 or 100/140μm multi mode 8.3/125, 8.7/125, 9/125 or 10/125μm single mode
LED Indicators	Power TP port: Link/Activity, Speed FX port: Link/Activity, FDX/Col
Data Transfer Rate	100Mbps: 148,800 pps 10Mbps: 14,880 pps
Flow Control	IEEE802.3x for full duplex Back pressure flow control for half duplex
Power Requirement	1A @ 5VDC from AC-DC Adapter 0.5A @ 5VDC from USB port
Dimension	26.2 (H) x 70.3 (W) x 94 (D) mm
EMC Complaint	FCC Part 15 Class A and CE Mark
Environment	Operating Temperature: 0° ~ 50°C Storage Temperature: -25° ~ 70°C Humidity: 5% ~ 90% non-condensing

TOP

Ordering Information

Model	Description
UCT6120-ST	UTP to Fiber Converter 10/100M to 100Base-FX Multi-mode (ST: 2Km)
UCT6120-SC	UTP to Fiber Converter 10/100M to 100Base-FX Multi-mode (SC: 2Km)
UCT6120-SC.S20	UTP to Fiber Converter 10/100M to 100Base-FX Single-mode (SC: 20Km)
UCT6120-SC.S40	UTP to Fiber Converter 10/100M to 100Base-FX Single-mode (SC: 40Km)
UCT6120-SC.S60	UTP to Fiber Converter 10/100M to 100Base-FX Single-mode (SC: 60Km)
UCT6120-SC.S80	UTP to Fiber Converter 10/100M to 100Base-FX Single-mode (SC: 80Km)

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.